Use this small DC disconnect, which includes the inverter breaker, to provide overcurrent protection for any single inverter. The MNDC comes with a DIN rail for 5 additional DC breakers for DC loads, a charge controller disconnect, a battery status monitor, etc. as well as a ground bus, and a 5/16" bonding battery negative stud. Mounting holes for a 500 A shunt are built in. The white powder-coated aluminum chassis measures 10" X 5" X 18" and weighs 7 lbs. Three main breakers sizes are available. Left side main breaker placement is available by special order.
The MNDC Plus version has an additional DIN rail allowing up to 10 DIN mount breakers. Two DIN rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the ¾" 150 VDC breakers that range from 60 A to 100 A. Additional configurations include: an MNDC-GFP80 with 4 panel mount breakers, or one MNDC-GFP, one ¾" panel mount breaker and 5 DIN mount breakers with a 125-250 A inverter breaker. Circuit breakers and DC GFP are sold separately. Mounting is provided for a 500 A shunt and an MNTBB-R terminal busbar. Battery negative stud and ground busbar included.