Categories
 

Blue Sky Energy

Blue Sky Energy

The Blue Sky Solar Boost features reverse-polarity protection, MPPT, and selectable-charge voltage for flooded and gel lead-acid batteries. An equalize function periodically conditions liquid electrolyte lead-acid batteries. An optional user-friendly digital display is available to monitor PV charge performance. The display shows battery voltage, solar current, charge current and charge mode, either in the controller, as a remote panel installed up to 300 feet away, or both. Optional temperature compensation of charge voltage is also available to further improve charge controller and battery performance. Solar Boost controllers are available with or without digital display and optional remote display and are covered by a 3-year limited warranty.

Solar Boost 50L

This 50L charge controller can be used on 12 and 24 VDC battery system. It can also be used to charge a 12 VDC battery from a 24 VDC array. Maximum open-circuit PV array voltage is 57 VDC. Listed to UL 1741 and CSA E332-1/2. Blue Sky Energy Solar Boost 3048.

SB3048 is designed to charge 24 and 48 VDC battery systems from a 48- to 60-volt array (maximum open-circuit voltage is 140). Maximum charge current is 30 A output at 24 or 48 VDC. Listed to UL 1741 and CSA E332-1/2.

Solar Boost 2000E

This 25 A solar charge controller is for 12 VDC systems and has a maximum input Voc of 30 VDC. This controller is a very popular in RV installations. It mounts in a 5-11/16" x 3-15/16" cut-out and is wired from the rear. An optional box allows for surface mounting.

IPN Controllers

Solar Boost 3024i and 2512iX charge controllers include load control outputs. These controllers can also serve as lighting controllers with complete flexibility over post-dusk and pre-dawn ON time settings. An IPN Pro-Remote is required to enable and configure dusk-to-dawn lighting control. The IPN Pro-remote does not need to remain with the system and can be used as a setup tool only.


Solar Boost 2512i , 2512iX, and 2524iX

The Solar Boost 2512i provides a fully automatic 3-stage charge controller system. A partial IPN network interface is included to allow use of the IPN-Remote or IPN Pro-Remote displays. Additional features provided in the Solar Boost 2512iX and 2524iX include automatic or manual equalization, battery temperature sensor input, full IPN network compatibility, and an auxiliary output. The user-configurable auxiliary output can serve as either a 25-amp (15/20 in 2524iX) load controller or a 2-amp auxiliary battery charger. The auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV.


Solar Boost 3024iL

SB3024iL is designed to charge 12- and 24-volt battery systems from a 24-volt array (maximum open circuit voltage is 57). Maximum charge current is 40 amps output at 12 and 30 amps at 24 VDC. The new IPN network interface coordinates multiple controllers and shares temperature sensors and display. ETL/cETL Listed.


Optional Equipment

A remote temp probe and a remote digital display can be mounted up to 300 feet away and used with all of the Solar Boost controllers. Optional shunts allow it to monitor other charging sources and loads.


IPN-Remote

The IPN-Remote display provides basic monitoring for IPN compatible charge controllers. The unit displays battery voltage, output current and charge controller system status for up to 8 controllers on a single IPN network. An LED display is used to provide readability in any lighting. The charge status indicator displays present charge controller system status and shows relative battery state-of-charge. When the battery is being charged the display toggles between battery voltage and charge controller output current. The current display can be configured to show the total output current from all controllers on the IPN network, or the output current from a particular controller. Multiple IPN-Remote displays can be placed on a single IPN network even if an IPN Pro-Remote is already present.


IPN Pro-Remote

The Pro-Remote combines charge controller monitoring and battery system monitoring into a single user-friendly remote display. With the IPN Pro-Remote you no longer have to guess how much battery capacity remains. A high-accuracy calculation of remaining battery capacity compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. Information learned from past battery behavior is used to continuously improve metering accuracy. The IPN Pro-Remote also monitors and controls Blue Sky's IPN-based charge controllers. It can monitor both the combined total and individual status of up to eight IPN charge controllers on a single IPN network.

Display: List / Grid
Show:
Sort By:
BLUE SKY, 720-0011-01, SOLAR BOOST 2000
BLUE SKY, 720-0011-01, SOLAR BOOST 2000 SB2000E Wall mount box - 2.75" deep. Black powder coa..
$31.50
Ex Tax: $31.50
BLUE SKY, CURRENT BOOSTER, 24V 70A DC, O
BLUE SKY, CURRENT BOOSTER, 24V 70A DC, O Use to greatly increase load switching capability of..
$94.50
Ex Tax: $94.50
BLUE SKY, DUO OPTION UPGRADE FOR SB 3024
DUO-Option, Software upgrade converts SB3024i(L). Auxiliary output into 20A PWM diversi..
$90.00
Ex Tax: $90.00
BLUE SKY, IPNPRO, IPN PRO REMOTE DISPLAY
Calculates remaining battery capacity by compensating for a variety of factors including char..
$198.00
Ex Tax: $198.00
BLUE SKY, IPNPRO-S, IPN PRO REMOTE DISPL
BLUE SKY, IPNPRO-S, IPN PRO REMOTE DISPLAY IPN-ProRemote display with 500amp shunt. 25' (7.6m..
$234.90
Ex Tax: $234.90
BLUE SKY, IPNREM, IPN REMOTE DISPLAY
BLUE SKY, IPNREM, IPN REMOTE DISPLAY he IPN-Remote display provides basic monitoring for Blue..
$89.10
Ex Tax: $89.10
BLUE SKY, SB2000-E, MPPT CONTROL, SOLAR
BLUE SKY, SB2000-E, MPPT CONTROL, SOLAR Patented Maximum Power Point Tracking (MPPT) technolo..
$277.97
Ex Tax: $277.97
BLUE SKY, SB2512i-HV, MPPT CONTROL, SOLA
BLUE SKY, SB2512i-HV, MPPT CONTROL, SOLAR 12V 20/25A amp MPPT solar charge controller. Replac..
$191.70
Ex Tax: $191.70
BLUE SKY, SB2512iX-HV, MPPT CONTROL, SOL
BLUE SKY, SB2512iX-HV, MPPT CONTROL, SOLAR 12V 20/25A amp MPPT solar charge controller. Repla..
$228.60
Ex Tax: $228.60
BLUE SKY, SB3000I, MPPT CONTROL, SOLAR B
BLUE SKY, SB3000I, MPPT CONTROL, SOLAR B 12V/30A 400W MPPT solar charge controller 12V/22A 29..
$287.10
Ex Tax: $287.10
BLUE SKY, SB3024DiL WITH FACTORY INSTALL
BLUE SKY, SB3024DiL WITH FACTORY INSTALL SB3024iL with digital display. ETL/cETL Listed to UL..
$466.20
Ex Tax: $466.20
BLUE SKY, SB3024DiL, MPPT CONTROL, SOLAR
BLUE SKY, SB3024DiL, MPPT CONTROL, SOLAR 40A/12V - 30A/24V MPPT PV charge controller. ETL/cET..
$432.00
Ex Tax: $432.00
BLUE SKY, SB3024iL WITH FACTORY INSTALLE
BLUE SKY, SB3024iL WITH FACTORY INSTALLED 40A/12V - 30A/24V MPPT PV charge controller. ETL/cE..
$403.20
Ex Tax: $403.20
BLUE SKY, SB3024iL, MPPT CONTROL, SOLAR
BLUE SKY, SB3024iL, MPPT CONTROL, SOLAR 40A/12V - 30A/24V MPPT PV charge controller. ETL/cETL..
$369.00
Ex Tax: $369.00
BLUE SKY, SB3024PDiL, SOLAR BOOST SB3024
SB3024i cover with built in digital display Solar Boost 3024i and 2512iX charge controller..
$98.10
Ex Tax: $98.10
BLUE SKY, SB3048PDL, SOLAR BOOST SB3048
SB3048 front cover digital dsiplay       Dimensions: 10"H x 8 3/4"..
$109.91
Ex Tax: $109.91
BLUE SKY, SC30, 30A PWM PANEL MOUNT CHAR
A precise PWM solar charge controller 12V/30 amp entry level quality solar controller. ..
$152.10
Ex Tax: $152.10
BLUE SKY, SC30-ADAPTER
BLUE SKY, SC30-ADAPTER 7.5"x4.6" (19.1x11.7cm) Black panel existing cutout adapter. Covers ex..
$26.10
Ex Tax: $26.10
BLUE SKY, UCM, COMMUNICATION BRIDGE AND
BLUE SKY, UCM, COMMUNICATION BRIDGE AND COMMUNICATIONS BRIDGE   Provides for remote ..
$269.10
Ex Tax: $269.10
BLUE SKY,  930-0022-20, SOLAR BOOST BAT
The ideal charge voltage required by batteries changes with battery temperature. The ba..
$31.50
Ex Tax: $31.50
BLUE SKY,  SB1524iX, MPPT CONTROL, SOLAR
BLUE SKY,  SB1524iX, MPPT CONTROL, SOLAR 12V / 20A or 24V /15 A low cost MPPT charge con..
$228.60
Ex Tax: $228.60
SHUNT, MKB-100-100, 100A 100mV
Shunts enable measurement of amps and amp-hours with the TriMetric battery monitor. Res..
$40.00
Ex Tax: $40.00
SHUNT, MKB-500-50, 500A 50mV
Shunt for use in DC monitor systems. Use the 500amp shunt if you have a 12v inverter larger than ..
$36.00
Ex Tax: $36.00
Sign up for newsletter