PV Wire Array Cables
These output cables are compatible with many modules brands to connect strings to junction boxes or grid-tie inverters. They have a male connector on one end and a female connector on the other end so they can be used to extend the cables on the modules or be cut in half and used to connect to a roof-top j-box or combiner. For example, if you need a 30' male and a 20' female, order a 50' cable. Made with double insulated black #10 AWG, PV WIRE, USE-2 sunlight-resistant cable. Use the locking sleeve where a tool is required to disconnect.
Choose the connector type to match the modules or other equipment you will be installing. Note that module manufacturers can change connectors without notice, so be sure to check the latest data sheets.
MultiContact MC4 (Solarline2) connectors are compatible with most Yingli, SolarWorld, and Sanyo modules as well as the output of most Tigo and SolarEdge optimizers.
Huber and Suhner Radox twist-lock connectors are compatible with REC modules.
Tyco SolarLok connectors are compatible with LG Electronics modules.
SMK connectors can be mated with MC4, but are not listed as fully compatible at this time. These connectors are used on most Sharp modules and on some Sanyo modules sold in Europe.