The Multi-Contact MC4 crimping tool is used to assemble MC4 (Solarline 2) locking connectors with 10 or 12 AWG stranded wire. A set of 2 plastic wrenches is used to tighten the sealing nut in the connectors and to unlock the male and female connector.
MC Solarline 2 MC4 pin crimper for 10/12 AWG wire
MC Solarline 2 open-end spanner set (2-pack)
Tyco SolarLok Crimping Tool
The Tyco SolarLok crimping tool is used to assemble SolarLok locking connectors with 10 or 12 AWG stranded wire.
Tyco crimper for 10/12 AWG wire
Hammer Crimp Tool
This simple, inexpensive crimping tool can be used to crimp connectors on 8 through 4/0 AWG wire. Spring-loaded pin locks in "up" position for loading connector and cable. When released, the pin holds the connector securely during crimping. Use with a hammer or vice.