Categories
 

SCHNEIDER, RNW8651060, AGS AUTOMATIC GEN

SCHNEIDER, RNW8651060, AGS AUTOMATIC GEN
Product Code: 020-08050
Availability: In Stock
Price: $213.60
Ex Tax: $213.60
Qty:     - OR -   Add to Wish List
Add to Compare
The XW AGS can be customized to suit each user’s preferences. The user can define whether the generator should be activated by low-battery voltage, state-of-charge, thermostat operation, or load on the inverter(s). A quiet-time setting prevents the generator from starting at inconvenient times. LED lights display the status of the XW AGS, while all user-defined settings are programmed through the XW system control panel (XW SCP).
 
  • Compatibility – the XW AGS connects to other Xanbus™-enabled XW System devices without requiring additional hubs, control cards, or other device-specific control panels
  • Works with AC or DC generators with either two-wire or three-wire start controls
  • Configurability – comprehensive customizable triggers based on low-battery voltage, change in charging state, high inverter load, thermostat signals, planned exercise periods, max run-time, and quiet-time settings
  • Non-volatile memory – preserves XW AGS settings even if the network power is interrupted or network communication is disrupted
    Note: The XW AGS requires an XW System Control Panel (XW SCP) for configuration and monitoring.

 

Electrical Specifications

 

Nominal input network voltage 

15 Vdc4000 W

Maximum operating current

200 mA8000 W

Communication physical layer

Two, CAN

Relay contact voltage rating

12 Vdc, 30 Vdc maxTrue sine wave

Maximum relay contact current

 

5 Adc95%

Communication protocol

Xanbus™

Maximum cable length

130’ (40 m)

Mechanical Specifications

 

Mounting

Wall mount, 4 x #6 screws included

Dimensions (H x W x D)

3.75 x 5.75 x 1.5” (95.5 x 146 x 37 mm)

Weight

0.5 lb (0.225 kg)

Shipping dimensions

10.5 x 8.5 x 2.5” (267 x 216 x 64 mm)

Shipping weight

1.70 lb (0.77 kg)

Connectors

Two Xanbus™ RJ45-8 pins

One 20-contact pluggable connector (Tyco Mate ’n’ Lok two connector) - Wiring harness included

Standard warranty

Five years

 
Weight(@Shipping):
3.00 LBS

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

The XW AGS can be customized to suit each user’s preferences. The user can define whether the generator should be activated by low-battery voltage, state-of-charge, thermostat operation, or load on the inverter(s). A quiet-time setting prevents the generator from starting at inconvenient times. LED lights display the status of the XW AGS, while all user-defined settings are programmed through the XW system control panel (XW SCP).
 
  • Compatibility – the XW AGS connects to other Xanbus™-enabled XW System devices without requiring additional hubs, control cards, or other device-specific control panels
  • Works with AC or DC generators with either two-wire or three-wire start controls
  • Configurability – comprehensive customizable triggers based on low-battery voltage, change in charging state, high inverter load, thermostat signals, planned exercise periods, max run-time, and quiet-time settings
  • Non-volatile memory – preserves XW AGS settings even if the network power is interrupted or network communication is disrupted
    Note: The XW AGS requires an XW System Control Panel (XW SCP) for configuration and monitoring.

 

Electrical Specifications

 

Nominal input network voltage 

15 Vdc4000 W

Maximum operating current

200 mA8000 W

Communication physical layer

Two, CAN

Relay contact voltage rating

12 Vdc, 30 Vdc maxTrue sine wave

Maximum relay contact current

 

5 Adc95%

Communication protocol

Xanbus™

Maximum cable length

130’ (40 m)

Mechanical Specifications

 

Mounting

Wall mount, 4 x #6 screws included

Dimensions (H x W x D)

3.75 x 5.75 x 1.5” (95.5 x 146 x 37 mm)

Weight

0.5 lb (0.225 kg)

Shipping dimensions

10.5 x 8.5 x 2.5” (267 x 216 x 64 mm)

Shipping weight

1.70 lb (0.77 kg)

Connectors

Two Xanbus™ RJ45-8 pins

One 20-contact pluggable connector (Tyco Mate ’n’ Lok two connector) - Wiring harness included

Standard warranty

Five years

 
Weight(@Shipping):
3.00 LBS

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Sign up for newsletter