When your fully automatic Distiller is installed in your furnace or utility room, tapped into the main water line (1) and, plugged into the normal household current, your Distiller will automatically draw water into the boiling chamber (2), a regulated start / stop float system (3) extends the life of the heating element (4). When the water boils, steam rises, leaving contaminants behind. The vapor then goes into an exclusive triple-baffle system (5) and any volatile gases are released through a special built-in vent (6). After the steam passes through a fan-cooled condensing coil (7), the Distilled Water runs through a coconut charcoal filter (8), and finally into the holding tank (9).

The automatic pump shut-off control (10) protects the pump from burning out should the holding tank ever run out of water. Polar Bear Water Distiller boiling tanks are designed with a "V" shaped bottom (11) and are engineered from a very high quality stainless steel (12). Other exclusive innovations include an energy-saving system (13) which allows one-third of the Distilled Water in the holding tank to be drawn out before the unit starts up. This is more energy-efficient than running the distiller for small amounts of water and results in 25% lower operating costs! A built-in safety system (14) automatically shuts off the distiller should it overheat. Other extras include lighted switches (15), Distilled Water level sight gauge (16), convenient holding tank tap (17) and casters (optional) (18) for easy moving. The holding tank has a unique .2 micron air filtered system. Air is allowed to enter back into the holding tank through the filter (19). Filtered air and oxygen dissolved into the water assure that the bacteria-safe Distilled Water maintains its purity. This is also one of the reasons why Polar Bear Distilled Water is so fresh tasting.

• Compact light design.
• Optional Accessories: Stand, Auto-drain system, Pump kit with faucet, external Charcoal Filters, and feed line Sediment Filters.
• Easy to clean and maintain: V-shaped boiling tank bottom for fast, efficient drainage of impurities. Just open the tap and drain. For automatic draining and even less frequent cleaning, install a Polar Bear Auto-Drain.
• The distiller and holding tank are manufactured from attractive, long-lasting high grade 304 stainless steel.
• Triple-baffle system for the purest distilled drinking water available.
• Volatile gas release vent – expels contaminants with a lower boiling point than water.
• Automatic start/stop float system.
• Built-in safety system that automatically shuts off the distiller should it overheat.
• Comes complete with all parts needed for fully automatic operation.
• Flush mount, boiler lid for easier clean-up and a more compact design.
• Low level pump shut off prevents pump from running dry.
• Coconut Charcoal Filter.
• Air filter on Holding Tank prevents airborne contamination.
• Ten year limited warranty on all stainless steel parts and one year on all electrical parts and labor.

26CT Specs	Call
26M Specs	Call
26 D8 Specs	Call
42 D25 Specs	Call
42 D10 Specs	Call
100L Specs	Call
200L Specs	Call